Greenheck Microprocessor Controller (475595 IOM) TAP v2.10 A Instrukcja Użytkownika Pobierz pdf (Strona 12)

The microprocessor controller will revert to a default main menu loop. This loop includes several screens to view the

operating conditions of the unit. Scroll through the menu screens by using the

keys. Screens with a dashed

line border are dependent upon an optional accessory and may not always appear.

Main Menu Overview

THE SENSOR STATUS SCREEN DISPLAYS REAL TIME CONDITIONS FROM THE SENSORS

LOCATED IN THE UNIT AND THE ROOM (IF INSTALLED).

TIME DATE UNIT##

Supply Air: 000.0°F

Outside Air: 000.0°F

OA Humidity 00.0%

Cold Coil: 000.0°F

Room Temp: 000.0°F

Room Humidity: 00.0%

STATUS LINE

OCCUPANCY OVERRIDE (IF UNOCCUPIED)

If the unit is currently unoccupied, the occupancy can be temporarily overridden

for a period of Override Time. The Override Time parameter can be set from one

to three hours.

Occupancy Override

Clock Override: OFF

Override Time: 1 hr

TIME DATE UNIT##

TAP v2.10 GWY1X000XXXX

STATUS LINE

THE INITIAL MENU SCREEN DISPLAYS THE PROGRAM VERSION, UNIT CODE AND STATUS

LINE. THE STATUS LINE DISPLAYS WHICH MODE THE UNIT IS IN.

Possible modes include:

• Initial Delay

• Opening Dampers

• Exhaust Fan Starting

• Supply Fan Starting

• System On

• Defrost Mode Active

• Sys On - Econ+Cooling

• Sys On - Economizer

• Sys On - Heating

• Sys On - Cooling

• Sys On - Dehumidifying

• Sys On - Dehumid & Reheat

• Unoccupied - Unit On

• Unoccupied - Unit Off

• Unoccupied - Dehumid

• Unoccupied - Dehumid & Reheat

• Unoccupied - Heating

• Unoccupied - Cooling

• Manual Override

• Remote Off

• Press Alarm Button!!!

• Temp Occupied

SUPPLY FAN STATUS. (IF EQUIPPED WITH VFD)

If equipped with a supply fan VFD, this screen will display the supply fan ramp

being sent from the controller to the VFD. The minimum and maximum speeds are

set in the VFD (See unit Installation and Operation Manual for VFD programming).

The controller can modulate the fan between the min and max speeds via an

analog output. This screen also displays the method of fan control and the

parameter it is controlling.

Possible methods include: Constant Speed, Duct Pressure Control, Building

Pressure Control, CO2 Control, and Single Zone VAV.

Supply Fan Status

Supply Fan Ramp: 0%

(0%=Min Speed by VFD)

Duct Ps Control

Duct Pressure: 0.00”wc

STATUS LINE

EXHAUST FAN STATUS. (IF EQUIPPED WITH VFD)

If equipped with an exhaust fan VFD, this screen will display the exhaust fan ramp

being sent from the controller to the VFD. The minimum and maximum speeds are

set in the VFD (See unit Installation and Operation Manual for VFD programming).

The controller can modulate the fan between the min and max speeds via an

analog output. This screen also displays the method of fan control and the

parameter it is controlling.

Possible methods include: Constant Speed, Building Pressure Control, Outdoor

Air Damper Tracking, and Supply Fan Tracking.

Exhaust Fan Status

Exhaust Fan Ramp: 0%

(0%=Min Speed by VFD)

Building Ps Control

Building Ps: +.000”wc

STATUS LINE

ENERGY RECOVERY WHEEL STATUS. (IF EQUIPPED)

If selected with a preheater, the status will also be displayed.

Energy Recovery

Wheel: 100% Speed

Wheel Differential

Pressure Is: Normal

Preheater: OFF

STATUS LINE

DDC Controller for Tempered Air Products

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

Greenheck Microprocessor Controller (475595 IOM) TAP v2.10 A Instrukcja Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Greenheck Microprocessor Controller (475595 IOM) TAP v2.10 A